There is no way to get the exact measurement of the TruXedo TruXport Soft, Roll-Up Tonneau Cover
Item # TX238101 without having one on hand to measure. I contacted Truxedo to see if they have the measurement and they do not obtain that information. I was advised that the frame rails will partially cover the stake pockets on your 1987 Ford F-150. If you are wanting to fully cover the stake pockets I recommend the TruXedo Stake Pocket Covers - 2002-2008 Dodge Ram and 1987-1998 Ford F-150... view full answer...
The Buyers Products Gooseneck Safety Chain U Bolt Kit # 337BRB03 has an overall length of 5-5/8 inches and a length of 4-3/4 inches that is below the top of the truck bed. The diameter is .57 inches and the on center measurement is 1-7/8 inches. view full answer...
I spoke with my contact at Bulldog Winch and he informed me that the overall length of the # BDW20234 measures 8-1/2 inches.
I attached a picture that shows all of the other dimensions of it in millimeters for you to check out as well. view full answer...
The 5th wheel tailgate # VG-100 has a 100 pound capacity. The cables on the truck that hold the tailgate might be rated differently so you would need to speak with a Ford technician for a specific weight capacity on the cables. Stromberg-Carlson warns not to stand on the tailgate. view full answer...
The Pollak Heavy Duty 7-Way part # PK11720 that you referenced is a heavy duty style 7-way. If you check out the attached diagram you'll see how it should be wired. view full answer...
I went out and took some measurements of the Demco adapter, part # DM6140. The total width side to side is 36 inches and from front to back is 27-1/2 inches. The ball hole is right in the middle so the center of it is 18 inches to each side and 13-3/4 inches to both the front and back. view full answer...
The pin weight of a fifth wheel trailer is normally right at 20 percent of the total trailer weight. If your trailer weighs 14,370 lbs it would have a pin weight around 2,874 lbs which would easily be compatible with the Ultra Fab Landing Gear kit part # UF17-943010 that has a 12k capacity. view full answer...